Samplers Tex servis MVPT, ROM, TS-PR, etc.

---

Retractable mechanisms for the sampling tube MVPT, MVPT-A are designed for mechanized removal and installation of the sampling tube (GOST 2517).

MVPT. Technical description.

---

ROM sampling devices are designed for sampling oil and petroleum products from pipelines with a nominal diameter DN from 40 to 1200 mm and a pressure from 0.2 to 6.3 MPa and designed in accordance with GOST 2517-85 (amendment No. 1) "Oil and petroleum products".

ROM. Technical description.

---

The TS-PR sampler is designed for manual and automatic sampling of oil and petroleum products from pipelines at an operating pressure from 0.2 to 6.3 MPa in laboratory conditions, the diameter of the bypass line is 50 mm.

• TS-PR. Technical description.

---

Samplers MAVIK-NS-TS, MAVIK-GZH-TS are designed for sampling:
MAVIK-NS – highly watered oil (crude oil),
MAVIK-NT – commercial oil and petroleum products,
MAVIK-GJ – easily evaporating petroleum products, liquefied gases and gas transported through pipelines with a pressure from 0.2 to 6.3 MPa.

• MAVIK-NS-TS, MAVIK-GJ-TS. Technical description.

---

The samplers PROBA-1M-TS are designed to take samples of commercial oil transported through pipelines according to a given program at an operating pressure from 0.2 to 6.3 MPa.

• SAMPLE-1M-TS. Technical description.

---

Standard samplers are designed for sampling oil and petroleum products from pipelines at an operating pressure from 0.2 to 6.3 MPa, and are designed in accordance with GOST 2517-85 (amendment No. 1) "Oil and petroleum products. Sampling methods".
The diameter of the bypass line DN 50 mm.
The product is available in two versions:
the composition of the Standard I oil samplers includes:
- sampler for manual sampling "STANDARD" – P;
- sampler for automatic sampling "STANDARD" –A;
- a slot-type air intake device or a tube-type air intake device;
- the Vortex flow mixer.
the composition of the Standard II oil samplers includes:
- sampler for manual and automatic sampling "STANDARD" - AL.

• Standard. Technical description.

---

The TS-PT tubular type sampling device is designed for sampling oil and petroleum products from pipelines with a nominal diameter DN from 80 to 400 mm and a pressure from 0.2 to 6.3 MPa and designed in accordance with GOST 2517-85 (Amendment No. 1) "Oil and petroleum products. Sampling methods".

• TS-FRI. Technical description.

---

The TS-PSCh slot-type sampling device is designed for sampling oil and petroleum products from pipelines with a nominal diameter DN from 40 to 1200 mm and a pressure from 0.2 to 6.3 MPa and designed in accordance with GOST 2517-85 (amendment No. 1) "Oil and petroleum products. Sampling methods".

• TS-PSCh. Technical description.

---

Catalog